LOW WATER PRESSURE REPAIR SPECIALISTS IN LA MESA
La Mesa Plumbing Can Solve Your Water Pressure Problems
Do your pipes rattle when you turn on the hot water or a heavy water flow? How about when you run the warm or hot water through the bath tub or sink faucet. Maybe you left the hot water heater on for a good five minutes but still the hot water only lasts for a minute. These are all signs of serious issues that need attention by your plumber in La Mesa.
Now For Fast, Reliable Service!
The most common indicators of a malfunctioning regulator are:
– high/low water pressure
– high/low water flow
– surging water
– banging pipes
– vibrating pipes
– leaking toilet fill valves
– leaking hot water relief valves
– broken pipes and leaking faucets
You may or may not notice the symptoms listed and the symptoms listed may be related to other plumbing system problems.
Recommended water pressure in a home is 55 PSI; the most state codes list the maximum safe allowable pressure at 80 PSI in any building. Most faucet, toilet and water heater manufacturers void their warranties when water pressure exceeds 80 PSI, and if you have a home warranty, some warranty companies void your coverage if your home has excessive pressure.
For those in the La Mesa area, there is an answer for plumbing help and related needs. Ritz Plumbing has been in the business of home and business plumbing repair since the mid-1940s. The plumbers have served the La Mesa area for decades, handling both residential and business plumbing needs, regardless of the size of the project. The service maintains a round-the-clock response reception, so weekend and evening jobs are not out of the question for emergency calls. This is particularly important since plumbing leaks and water problems don’t necessarily happen during business hours. Our plumbing’s skilled employees and plumbers are no strangers to handling hot water problems either. Our plumbers can deal with both standard water heater hot water systems as well as the new plumbing technology of tankless systems for water heating. They also bring with them a fundamental understanding of how plumbing systems are built, particularly with managing water pressure as water flow adjusted from the city main water supply to the much smaller system inside a hole or building.
Abnormal water pressure is a common problem in residential plumbing systems, particularly in homes with pipes that are older than 20 or 30 years. Today, many structures have plumbing installed with regulators to control water pressure from getting out of hand, but older buildings and homes did not have such controls. These gauges and valves control the flow so that it doesn’t overwhelm the pipe system in the structure. However, municipal agencies have upgraded their water systems over the years, so the water pressure today is far more than what was in the system 30 years ago.
Call Now For Fast, Reliable Service!
Common signs of water regulators starting to give up the ghost tends to be fluctuating water pressure. Another sign can be significant change in the water flow coming through the plumbing. If the water is burping and then surging out of a faucet it’s a symptom. The all-too-famous rattling or vibrating pipes is also a sign of too much pressure in the system. Not so related signs tend to be where water may be leaking out of valves either in toilets, faucets, or pipe connections. A layperson may think it’s really the valve or joint that has a weakness but instead the pressure is greater than the valve was designed for, thanks to a regulator failure.
The standard water pressure for a residential plumbing system in a home should be at 55 pounds per square inch, or PSI. The high range safety level is reached when the same plumbing PSI exceeds 80. Beyond this point, many plumbing manufacturers no longer back up the capabilities of their products as the pressure will eventually overcome their valves. Homebuilders will also back away from performing any repairs on a house with water pressure exceeding acceptable standards.
Where water line regulators begin to fail, the control aspect no longer exists as pressure pushes its way through into the rest of the plumbing system. Regulator failure can occur due to age or if the unit gets damaged somehow. It can also happen in an obvious fashion or not be seen for quite a while. Since much of a structure’s plumbing system tends to be buried behind drywall and separations, many leaks won’t be seen until they become much bigger or stronger. A related repair job can be quite a process as well. Failure generally requires a replacement of the unit, and the installation of a new part can be a technical affair. This is not the kind of job that gets fixed with a simple repair kit from your local hardware store.
A homeowner or building tenant can get many of these problems fixed with La Mesa Plumbing’s expertise and help. You don’t have to try to manage these plumbing problems alone. Making a quick call can get you back to normal quickly, with our skilled crews fixing the problem and restoring you to the way you were before the plumbing problems began.